Day 7-Where you should be

F- 5/15
G-5/16

Greetings Aquanauts! Here is a guide as to where you should be today. If you are not here yet, consider coming in during flex, tutorial, or coming during F/G if you have prep. I am also open to after school if you make an appointment. Remember...next week you get one day and then we are at the big pool!

Frame folks-Should have a frame design by now. Come with a materials list and you can get pipe/fittings from the store. I even have a spare set of motors/controlers so you can try out your design at the small pool today (10 min per team if there is a wait list!)

Motor folks-Should be about done adding propellers. Today will be all about waterproofing. Invite me over if you want some pointers...waterproofing is not hard but can be tricky if you use too much solder and hot glue! Remember...LESS IS MORE!

Control box folks-Should be done with the practice board and be soldering the actual control box.

Everyone using soldering irons today: Read directions and do all prep AWAY from irons so they can be used by someone else in the meantime.

Happy building!